Discover how CNC high-pressure waterjet technology can be evaluated for precision flashing removal, edge finishing, and cleaning of complex injection-molded plastic components in automotive, consumer electronics, and healthcare manufacturing.
In modern plastic manufacturing, achieving precise dimensions, clean edges, and consistent surface quality is essential. For manufacturers producing complex injection-molded plastic components, removing unwanted flashing and residual burrs is an important part of the post-processing workflow.
Traditional methods such as manual trimming, mechanical cutting, and abrasive finishing can present challenges when dealing with intricate geometries, narrow gaps, small openings, and delicate plastic structures.
Waterjet flashing removal offers an alternative approach worth evaluating. By using a precisely controlled high-pressure water stream, manufacturers can target unwanted material in selected areas without relying on conventional cutting tools.
Integrating 50 MPa high-pressure waterjet technology, synchronized 4-axis linkage, precision CNC positioning, and water recycling filtration, the FDS700 provides a platform for evaluating automated deburring and cleaning applications.
Flashing is excess material that escapes from the mold cavity during the injection molding process. It commonly appears along parting lines, around openings, near inserts, and at the edges of molded components.
Even small amounts of excess material can affect assembly compatibility, appearance, and dimensional requirements.
Excess material around edges and mating surfaces can interfere with assembly tolerances and component fit.
Housings, connectors, clips, and structural components may require clean edges for proper engagement.
Visible flashing can affect the appearance of automotive interior trims and consumer electronic housings.
Manual trimming depends on operator experience, which can make consistent processing more difficult at higher production volumes.
Waterjet flashing removal uses a controlled high-pressure water stream to target unwanted excess material on selected areas of a workpiece. Unlike conventional mechanical trimming, it does not require a cutting blade to directly contact the component.
The high-pressure pump generates a concentrated water stream, which travels through a specialized nozzle toward the designated processing area. CNC movement can coordinate the nozzle and workpiece positions according to a programmed processing path.
The plastic component is secured inside the machining cabin using a fixture designed for its geometry.
The processing path is configured according to the component geometry and the areas requiring flashing removal.
The high-pressure pump generates a water stream at the selected working pressure.
The waterjet is directed toward designated areas to remove unwanted material.
The processed component is cleaned and inspected for edge quality, dimensional integrity, and surface condition.
The Fedjet FDS700 is an enclosed CNC ultra-high-pressure waterjet deburring and cleaning center designed for precision manufacturing. It uses synchronized 4-axis linkage and high-pressure waterjets to process complex automotive and industrial components.
Its configuration combines a fully enclosed machining cabin, precision transmission components, a high-pressure pump station, and a water recycling and filtration system.
| Model | FDS700 |
|---|---|
| X-Axis Travel | 700 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 500 mm |
| Repeat Positioning Accuracy | ±0.05 mm |
| Maximum Spindle Speed | 500 rpm |
| Axis Configuration | Synchronized 4-axis linkage |
| Working Pressure | 50 MPa / 7,000 PSI |
|---|---|
| High-Pressure Water Flow Rate | 30 L/min |
| Waterjet Processing | High-pressure waterjet |
| Application | Deburring and cleaning |
| Jet Tool Holders | 4 standard / 6 optional |
|---|---|
| Machine Cabin | Fully enclosed design |
| Transmission | Taiwan PMI precision ball screw guides |
| Control | CNC servo control system |
| Water Treatment | Water recycling and filtration system |
The enclosed structure helps control water splashing and operating noise while providing a more controlled processing environment.
The heavy-duty welded machine structure is designed to support stable operation during industrial processing.
Taiwan PMI precision ball screw guides and servo control support accurate positioning and programmable movement.
The integrated system filters process water and supports water reuse to help improve water utilization.
For precision injection molding manufacturers, waterjet flashing removal may be worth evaluating across different product categories. Select an industry below to explore potential applications.
Automotive manufacturing involves a wide range of injection-molded decorative and functional plastic components. Their geometries may include grooves, openings, clips, and complex edges.
Potential application suitability should be verified through workpiece testing.
Electronic equipment manufacturers often produce complex plastic housings and precision structural components that require consistent edge quality and assembly compatibility.
The processing method should be selected according to material and part design.
Medical manufacturing requires strict control over product quality, cleanliness, and production processes. Selected molded components may be evaluated for waterjet post-processing.
Medical applications require validated cleaning, contamination control, material compatibility, and applicable regulatory procedures.
Different plastic components require different finishing technologies. Waterjet processing is not necessarily suitable for every material or component design. The following comparison highlights the main considerations when evaluating different approaches.
| Method | Main Characteristics | Considerations |
|---|---|---|
| Manual Trimming | Flexible and relatively simple | Labor-intensive and operator-dependent |
| Mechanical Cutting | Direct material removal using cutting tools | Tool contact and accessibility limitations |
| Abrasive Finishing | Suitable for selected surface and edge finishing | May affect delicate surfaces and dimensions |
| Waterjet Processing | Non-contact, programmable water stream | Requires pressure and jet-path optimization |
Waterjet processing does not rely on a conventional cutting blade contacting the workpiece.
Waterjet technology is a cold-process method without the localized heat associated with thermal cutting.
CNC programming and appropriate nozzle configurations can support processing of selected complex areas.
Programmable processing paths can help reduce dependence on manual operations and support repeatability.
Plastic materials behave differently from metals. Before introducing waterjet flashing removal into an injection molding production line, manufacturers should evaluate several factors.
ABS, PC, PA, POM, PP, and other engineering plastics have different mechanical properties. Material hardness, toughness, wall thickness, and structural design all influence processing results.
The thickness, shape, and position of flashing directly affect the required waterjet parameters. Thin flashing may require a different processing strategy from thicker excess material.
Excessive water pressure or unsuitable nozzle configurations may damage thin walls, deform delicate features, or affect the component surface. Pressure, nozzle diameter, jet angle, and processing distance should be determined through controlled testing.
Precision plastic parts must be properly supported during processing. A suitable fixture helps maintain positioning accuracy and prevents unwanted movement caused by waterjet forces.
Fedjet specializes in ultra-high-pressure waterjet equipment and automated waterjet processing solutions. The FDS700 integrates multiple technologies for industrial deburring and cleaning applications.
Provides a high-pressure waterjet source for industrial processing.
Supports synchronized processing movement for complex workpieces.
Designed to support accurate CNC positioning and repeatable movement.
Four jet tool holders as standard, with six available as an option.
Helps control water splashing and operating noise.
Supports process water filtration and reuse.
As precision injection molding continues to evolve, manufacturers need post-processing solutions that can accommodate increasingly complex component designs and demanding quality requirements.
Waterjet flashing removal provides an alternative technology worth exploring for selected plastic components, particularly where non-contact processing, programmable movement, and combined cleaning capabilities are desirable.
Fedjet's FDS700 CNC Waterjet Deburring Machine combines 50 MPa high-pressure waterjet technology, synchronized 4-axis CNC control, an enclosed machining cabin, and water recycling filtration.
Whether you manufacture automotive plastic components, consumer electronic housings, or precision industrial plastic parts, Fedjet can help evaluate the feasibility of waterjet processing for your application.
Send us your workpiece drawings, material information, or sample parts. Our team can evaluate the feasibility of waterjet processing and discuss a suitable machine configuration.
Explore FDS700 Machine → Contact Fedjet →Email: veron@fedjetting.com